White infrared heating panels. Go to shop
As every situation is different we are happy to liaise with you and discuss your heating needs but we do not fit the heaters, this must be done by a qualified electrician. We have tried to provide you with as much information as possible on the website and we are always happy to talk to our customers by phone, we would much rather you discuss your needs with us and choose the correct size heater than be disappointed next winter!
We stock three sizes of standard white infrared heating panel with aluminium frame, we can also have this frame powder coated in white ( or any other colour ) at an additional cost.
A number of small white panels can be fitted into the ceiling of a very large room or workplace.
350 watt panel 60 x 60cm Heating an area of about 7 square metres. 3.5kg in weight.
Our small panel provides gentle warmth and is ideal in the bathroom or study or can be simply fitted into the square frames of office suspended ceilings, or a number can be fitted over the ceiling or around the walls of larger rooms to decorative effect. Buy me
The mounting profile holes on the reverse side measure 32 x 29.5cm, the screw fittings provided will slot into here. The flex is 3 metres long and can be cut to suit.
600watt panel 60 x 90cm Heating an area of about 12 square metres. 5.75kg in weight.
Our 600 watt best seller panel is a popular size to heat rooms of the home, two panels can be positioned over the seating areas of a lounge / dining room. Buy me
The mounting profile holes on the reverse side measure 32 x 60cm, the screw fittings provided will slot into here. The flex is 3 metres long and can be cut to suit.
850watt panel 60 x 120cm Heating an area of about 17 square metres. 7.5kg in weight.
This large panel has infrared rays that can be felt up to 3 metres away, so this panel is often recommended in situations where people really need to feel the warmth directly, such as therapy rooms. A good choice for larger rooms in the home or office. Buy me
The mounting profile holes on the reverse side measure 32 x 60cm, the screw fittings provided will slot into here. The flex is 3 metres long and can be cut to suit.
All panels are just 2.5cm deep.
Panels are IP54 rated for use in bathrooms, we suggest the panel is fitted to the ceiling away from the bath or shower but above where you stand to dry, ideally the heater should have its own timer or programmer so that the heating can be on at a lower temperature throughout the day, this will ensure a general allround warmth and comfort.
We can now supply a simple programmer to control just one or a number of heating panels in a zone, these programmers allow you the flexibility and control of your daily heating needs to help avoid wasting energy. Please discuss your requirements with your electrician, as there are a range of other controllers available from a very simple timer switch to a complex home electrics programmer. Go to shop